Daya Bay Reactor Neutrino Experiment Sandbox > How_To_Replenish_Your_Ink_Cartridges_And_Recycle_It Daya Bay webs:
Public | 中文 | Internal | Help

Log In or Register
The simplest way to refill ink cartridges External link mark would buy an ink re-filling kit. This can be purchased from any internet store selling ink cartridges. Along with this kit you'd be provided with the essential tools along with a set of directions on how best to begin filling-the-empty-ink-cartridge.

Here are a few easy directions that could be adopted to refill your cartridge and it is not too complex.

1. Draw the ink of any one colour with the help of the syringe given in the re-fill kit. Ideally, this needs to be done over the sink. This can be to guarantee that even if a few of it spills over no records, clothes etc. gets ruined. The number of ink each printer holds generally fluctuates depending upon its producers. For instance, in most Epson printers the black cartridge carries about 17ml of ink as well as the colour cartridges hold around 8ml. Please refer to the instructions on your refill kit to assess how much ink should be injected into the cartridge.

2. A little hole needs to be made on top of the cartridge (May be done using a ball point pen), one per colour chamber. The hole needs to be on top of the cartridge next to the label. The needle should be shoved into the hole as well as the ink injected gradually. Whether the ink is not injected gradually, it could lead to foaming and air bubbles may be formed. If this happens, the re-filled cartridge might not be capable of print.

Warning: If this happens, support the cartridge over a waste paper basket upside down and swing upwards and cease suddenly. This could rectify the situation. If it does not then you certainly could clean out the ink heads with cleaner or try soaking the heads. This might eliminate any dry ink that's clogging the ink heads and let the ink to flow freely again.

3. The refill holes do not need to be sealed, as you will find already breather holes on top of the ink cartridges.

4. Any ink that is left over in the syringe can be returned to the bottle. The syringe must be cleaned with water and dried correctly before using it for a different colour. It might be helpful to work with different syringes for unique colours.

5. Once the refilled cartridge is put back in the printer, run the cleansing cycle 1 to 3 times. If you have any gap in printing, the cycle may be run a couple more times till the issue is rectified.

Before putting the re-filled cartridge back into the printer, you may hold it upside-down only to make sure ink is not dripping from the sponge.

Here are some things that must be kept in mind before re-filling a cartridge

1. The cartridge must be refilled before it is totally empty. If this isn't done, the cartridge can dry up entirely and get clogged.

2. It might be a great idea to put the refilled cartridge into the printer and leave it alone overnight so your pressure in the cartridge can secure.

3. While making the holes on top of the cartridge, to inject ink, please be sure you do not hit it too much or it might crack open the cartridge and produce it unworthy. It may also make a hairline fracture and let some air in, which would dry the ink outside prematurely.

A refill package is significantly cheaper than an extra cartridge and obviously promises more than only one refill. It's thus, easier in the pocket, retains us from adding more useless plastic to the environmental surroundings and raises the life of a cartridge click here External link mark.



Revision: r1 - 2014-01-23 - 15:23:28 - LilliAn236

Powered by the TWiki collaboration platform Copyright © by the contributing authors, 2007-2024.
Ideas, requests, problems regarding Daya Bay? Send feedback